Firmware Update 3.0

The Behringer WING console 3.0 firmware update adds bus-to-bus and channel-to-matrix sends, enhancements to custom controls and other improvements and bug fixes.

Features

Bus to bus send from/to all busses
Channel/Aux sends to all matrices
Bus to bus modes for custom fader layers
Pre-fader Delay on aux channels
Post-fader Delay on all busses
FX SPILL button on insert effects GUI
SOURCE EXTRACTOR/LA LEVELER gate/compressor combo plug-in for all channels
SOURCE EXTRACTOR/LA LEVELER gate/compressor combo plug-in in the Dynamics slot
Filter controls on EQ page
MAXER curves added to FILTER section
Talkback to all matrices
Gain, Trim, Phantom Power, Mute and Polarity information for each Source box
On/off switch for the LIMITER in MASTERING effects module
TRIM added to GEQ
Send fader assignment extended to MAIN1-4 and MATRIX1-8
New sends configuration overlay
Global option to always show active scene (or snapshot)
GPIO functions for delayed power on (e.g., for power amps)
CC functions for previous/next channel select
CC send functions extended to MAIN1-4 and MATRIX1-8
CC button function to set up the metering and solo TAP point
CC button function for channel solo
CC encoder function for lamp, glow and patch brightness
CC button function to set channel fader to -10dB
CC fader set option enabled for touch screen faders
CC value shown on the LCD screen when its name starts with '*'
Option to change network mode when using AoIP-WSG module

Changed

New files shown in file browser when USB record is started
DCA spill from right section to center section instead of left section
Layer offset restored when activating FX SPILL
Channel select overlay metering set to input
Delay mode (unit) option for all busses
MONITORS/TALKBACK configuration page
CC channel MUTE function allows mute override
MONITORS AUTO, PUSH and LATCH modes implemented for touch screen talk buttons
CC send function allows to control all possible sends
Warning when a bus is sent to the same bus (feedback loop)
PARTIAL LOAD and PARTIAL UPDATE keep the most recent scope selection
Increased SLOPE range for ULTRATAP DELAY plug-in
FX SPILL updated automatically when a different plug-in is loaded

Bug Fixes

Number of entries in playlist not correct when reloading open playlist
AUTOMIX spill mode displaying wrong channels
Channel preset load showing FX warning even when FX not in scope
AES50 I/O highlight function (Sources/Outputs)
Firmware update file size check
Channel detail section delay LED control
Routing lock switch set to unlock when +1 AUTO was active
COMPRESSOR detector switch sometimes shown when AUTO ENV is active
Crash when a stereo source was routed to more than 5 destinations under very specific conditions
Loading of old FX presets (load button was not active)
Preselection of scopes (Toolbox)
Short signal drop (LIMITER release) when loading DRAW MORE plug-in
Crash when using selected channel send CC encoders
Crash when changing default Matrix mode
VSS3 preset selection box not selectable
MIDI CC faders not working for CC > 76
LIBRARY channel preset scope: sends partially shown as N/A
MONITORING section delays not working
MATRIX direct inputs not working
Drag issues on EQ screen
Channel strip LEDs (MAIN, DCA, MUTE GROUP) not working correctly on full-size WING